50 Chain Sprocket

SSTmachinery make good quality chain sprocket. Material: C45, steel, stainless steel, brass. ANSI ,DIN,JIS ,BS,ISO standard or non standard by drawing.

Send Inquiry

Product Introduction

Parameter for 50 chain sprocket:

Pitch 15.875

Internal width 9.52

Roller 10.16

Teeth NO: 8-125

50 chain prockets are widely used in various machinery:

This paper describes in detail how the manufacturer of the buried scraper conveyor designs the moving sprocket: the manufacturer of the buried scraper conveyor generally adopts the concave tooth type for the moving sprocket of the buried scraper conveyor, which has stronger adaptability to the domestic ring chain than the convex tooth type sprocket, which can ensure that the chain will not fall off after the chain is seriously worn and the circumference is increased, so as to greatly prolong the chain replacement cycle.

The corresponding chain tensioning adjustment adopts worm gear and worm deceleration self-locking tensioning mechanism, which is labor-saving, easy to operate, and ensures synchronous tensioning on both sides. At the same time, the high-strength mining ring chain of buried scraper conveyor is used as the conveyor chain, which has large bearing capacity and wear resistance; Due to the characteristics of material diversion, the return chain and scraper are separated from the materials, so as to avoid the accident of blocking the chain scraper caused by the sudden increase of feed volume and filling the machine bin.

Moreover, the buried scraper conveyor is also equipped with an overload protection device. When the chain is overloaded, it will automatically stop and send an alarm signal. In order to reduce the wear of scraper and chain of buried scraper conveyor, basalt cast stone is lined inside, which not only improves the service life of metal substrate, but also has less friction resistance than metal substrate.

The utility model relates to a wheel with cogged chain teeth, which is used to mesh with a block with accurate pitch on a link or cable.

50 chain sprocket is widely used in chemical industry, textile machinery, food processing, instrumentation, petroleum and other industries, such as mechanical transmission.

The sprocket tooth shape must ensure that the chain can enter and exit the meshing smoothly and freely, so as to minimize the impact and contact stress of the chain link during meshing, and it should be easy to process.

overview