Knowledge

There are different way of sealing, generally we can divide the sealing as below: 1. Thread seal 2. O-ring seal 3. Metal to metal hard seal 4. With O-ring bevel

Types of hydraulic pumps Hydraulic pump is a kind of hydraulic component that provides pressurized liquid for hydraulic transmission. It is a kind of pump. Its function is to conve

Types of hydraulic pumps Hydraulic pump is a kind of hydraulic component that provides pressurized liquid for hydraulic transmission. It is a kind of pump. Its function is to conve

Classification of hydraulic tubes Hydraulic hoses has been classified by different pressure, diameter, number of steel wire layers and joint types. The inlet and return pipes are m

Positioning error correction in linear motion system The progress of servo technology means that customers expect their servo control machines to run with higher and higher perform

The bearing in the bearing exhibition is a component used to support the shaft, guide the rotational movement of the shaft, and bear the load transmitted from the shaft to the fram

Classification of rubber conveyor belts It is divided into: fabric core conveyor belt and non-fabric core conveyor belt. Fabric core conveyor belt is divided into two types: layere

There are three types of belts commonly used in automobiles: fan belt, multi wedge belt and timing belt. Installation position of automobile belt: in automobile application, it is

Hydraulic system composition A complete hydraulic system consists of five parts, namely power components, executive components, control components, auxiliary components and working

Lubrication function and maintenance method of bearing The editor of the bearing exhibition learned that in order to maintain the original performance of the bearing in good condit

Bearing code The bearing models in the bearing exhibition are generally composed of front code, basic code and rear code. Generally, the bearing model is only represented by the ba

Several ways of common positioning forms of bearings The inner and outer rings of the end bearing are fixed in two directions and bear two-way axial force. The bearing at the other