Chain Sprocket Hub

Chain sprocket hub B type or C type with hub Material: C45, A3, steel

Send Inquiry

Product Introduction

Flange sprocket processing: chain sprocket hub, flange sprocket processing has the following two methods;

A . Overall machining, that is, machining the tooth shape after bar cutting. This method has low material utilization,High cost.

B. Welding processing, it is obvious that this method has higher material utilization rate and lower wood formation than overall processing. Specific addition

The working method is as follows: the gear ring can be cut with steel plate, and the outer diameter and shaft hole can be roughened, and the welding groove shall be reserved on one side of the shaft hole.

Then, the flange part of the bar car is convex, and the ring gear part and the flange part are welded on both sides before machining finished product, welded junction part turning arc. After machining, select an appropriate method to process the tooth profile.

It is better to use low hydrogen electrode for welding sprocket to prevent 45 steel from cracking due to welding junction. For large

Before welding important sprockets, it is best to preheat the welding rod at a preheating temperature of 150-200 for 1-2 hours.

Chain sprocket hub, sprocket processing tools mainly include:

1. Standard hobs are applied to the processing of small and medium-sized standard sprockets.

2. Disc milling cutter is a multi tooth disc cutter designed according to the tooth profile of sprocket. Generally, the sprocket is processed on horizontal milling.

3. The forming cutter is a single tooth cutter designed according to the sprocket tooth profile. During machining, the sprocket is indexed by the indexing head. The forming cutter is installed on the end mill for one-step processing.

4 . Profiling cutting is the simplest method. It does not need to make any cutting tools. Only make a cutting template according to the sprocket tooth shape and cut it on the profiling cutting machine. The tooth surface needs to be polished and polished after cutting. The heat treatment of sprocket tooth surface is generally hrc40-45, which can be treated with high frequency or surface flame quenching. Low carbon steel can be carburized.

Designed to weld easily onto a split A-plate sprocket, the Chain Sprocket Hub is precision manufactured from high-strength steel. S-6 hubs are available in bore sizes ranging from 4-3/4" to 6" and are 10-1/4" in diameter. They are bolted together with two high-strength sprocket head cap bolts. For more information or to get a quote on S-6 split hubs, please contact us and we will be happy to assist you.

Improve your kart's performance with our lightweight and durable Chain Sprocket Hub. Made from high-quality aluminum, this hub is built to withstand the rigors of kart racing. The 1.25 axle size and 6 X 5.25-inch bolt pattern ensure a perfect fit, while the black anodized finish gives it a sleek and professional look. Each hub comes with a bolt kit, making installation a breeze. Give your kart the edge it needs on the track with our Chain Sprocket Hub.

overview