
XL Timing Pulley
XL timing pulley:
XL timing pulley can use on small machine and device.
We can make good quality XL timing pulley.
Motor overheating is a problem that often occurs during the movement of the synchronous belt pulley. The treatment methods are as follows: 1. The proportion of the medium is greater than that of the synchronous belt pulley configuration motor: install a suitable synchronous belt pulley motor. 2. The packing gland is pressed too tightly or the mechanical seal spring is adjusted too tightly: the spring compression of the gland or mechanical seal can be adjusted. 3. The assembly quality of the pump is poor, there is friction or the motor and pump shaft are not concentric: check the assembly quality and remove the assembly fault. 4. Connection between wheel and shaft: when the gear or belt wheel is connected with the shaft, the transmission clearance shall also be removed.
The inner core of Pu synchronous belt generally includes galvanized steel wire, copper plated steel wire, kraft cable core, glass fiber cable core, etc., with PU adhesive layer attached. There are two types of single-sided toothed belt and double-sided toothed belt.
Pu synchronous belt is a kind of meshing transmission, which adopts the meshing between the belt teeth and the grooves of the pulley to transmit motion and power. Therefore, it has various advantages of gear transmission, chain transmission and flat belt transmission. High wear resistance ensures that it can still maintain good movement ability in transmission. Small tolerances.
















Hot Tags: xl timing pulley, China, suppliers, manufacturers, factory, customized, wholesale, for sale, made in China
Previous
AT10 PulleyNext
L Timing PulleyYou Might Also Like
Send Inquiry











