Rubber belt in wash machine

Rubber Belt in Wash Machine. Most washing machines use o-belts. The top width of o-belts is 10mm and the thickness is 6mm. The inner circumference ranges from 330 to 3000mm. Because the triangular belt is produced in accordance with international standards, as long as the model is the same, the triangular belts of different brands can be used interchangeably. 

The belt of automatic washing machine has letters and numbers. 

Rubber Belt in Wash Machine has A-type and O-type, which is related to the fan impeller and clutch belt disc groove. 

The number represents the inside diameter and circumference of the belt. 

A gang of fully automatic washing machines has a mother behind about 500. A stands for wide and O for narrow. Double cylinder washing machines are generally between 600 and 800. 

1. If it is a drum washing machine, it must be replaced with a new belt, because most drum washing machines cannot fasten the belt by adjusting the motor position. 

2. If it is a double barrel or ordinary full-automatic wave wheel washing machine, the belt can be fastened by adjusting the motor position.

Disassembly and assembly of rubber belt in wash machine.

Loosen the motor fixing screw (there is a waist hole below), push the motor to loosen the belt.

Disassemble the belt protection cover plate and pay attention to the difference between the upper and lower.

Take off the rubber belt in wash machine and replace it with a new one. According to the principle of mechanics, first install the small pulley, then hold the belt with one hand, put the belt into the large pulley with the other hand, and slowly rotate the large pulley. Install the small wheel on one side, and try to wind the big wheel in one direction. If you can't wind it, turn the big wheel and it will go up, and the belt will be sleeved.

After inserting, slightly tighten the fixing bolts of the motor, push the motor by hand, and test the tightness of the belt for many times. When you feel it is just right, tighten the fixing screws of the motor. 

Hot Tags: Rubber belt in wash machine, China, suppliers, manufacturers, factory, customized, wholesale, for sale, made in China