Taper Bushing 3525

Taper sleeve( taper bushing 3525) is a very common mechanical transmission connector. The taper sleeve( taper bushing 3525) can be widely used with the connection between pulley, sprocket, gear and shaft. The taper sleeve can bring the advantages of high centering accuracy, compact structure, convenient installation and so on. At present, the common cone sleeve is divided into two types: transmission part cone sleeve and structural part cone sleeve.

Taper sleeve of transmission parts: its taper is generally greater than 1:20. It is widely used in transmission structures, such as gears, pulleys, sprockets, synchronous pulleys, etc. in practical applications, it often needs to be removed frequently, such as installing and changing gears.

Taper sleeve of （ taper bushing 3525）structural member: the taper is generally no more than 1:20, which is used in the structure with high centering accuracy and generally does not need to be disassembled in use. The conical sleeve of structural member refers to the conical sleeve in the structure that is not directly used for belt transmission, chain transmission and gear transmission, but also transmits power.

Machining and clamping of inner taper hole

The inner and outer circles of the taper sleeve are conical surfaces, and the axial dimension is long. If the card is loaded on the vertical lathe according to the general processing habits, the center of gravity of the workpiece is high and the stability is poor. Therefore, special clamping tooling can be used, i.e. welding the process disc and process block, clamping the process disc with the lathe chuck, and pressing the workpiece with the middle process block to process the inner conical surface. By this method, the stability and reliability of the machining process are guaranteed.

We can make good quality taper bushing products and offer good service to our client.

Hot Tags: taper bushing 3525, China, suppliers, manufacturers, factory, customized, wholesale, for sale, made in China