T5 Timing Belt

Parameter T5 timing belt:

Pitch 5

Tooth height 1.2

Belt thickness 2.2 

Generally, in the transmission process of the synchronous belt, as far as the transmission device itself is concerned, its accuracy is not very high, and the repeatability may be very poor due to a certain degree of deformation on the wheel belt. The synchronous belt cannot have accurate accuracy division like ordinary gears. In this case, the selection quality is relatively better, The synchronous belt with better workmanship can reduce the deformation to a certain extent, so as to improve the accuracy of the synchronous belt. In the case of semi closed loop, the feedback unit of general equipment lies in the motor of the overall equipment, but there is no feedback in the general transmission unit. In this case, the synchronous belt can only take two ways to improve a certain degree of accuracy. One is to replace better equipment and improve its own transmission accuracy, Another way is to improve the accuracy of the control system. In the case of closed loop, it is necessary to pay attention to a special part - grating ruler. Its accuracy and the accuracy of the control system play a decisive role in the accuracy of the synchronous belt.

Special toothed synchronous belts are divided into: the lightest t2.5, the lightest T5 timing belt, the heaviest T10, and the heaviest T20. At present, there are at5, at10, and at20 on the market. These are different from non at. The difference between at type and T type is that the bottom is circular arc teeth, while t type is full ladder teeth. Compared with at transmission, it will be more precise, with small transmission clearance, and of course, the noise will be smaller.

Application of synchronous belt model and material in the current market:

The timing belt of MXL XL L H XH Xxh is currently the most widely used and can be produced from polyurethane and rubber materials

Htd3m htd5m htd8m htd14 htd20m is produced by widely available polyurethane and rubber materials

S2M S3M s4.5m s4.5 s8m s14m is widely used in rubber production

1.5gt 2GT 3GT 5gt is not widely used (try to avoid using this model) rubber material production

8yu is not widely used in rubber production

Rpp5m rpp8m is not widely used. The ring belt is made of rubber and the open belt is made of urethane

We can make good quality T5 timing belt.

Hot Tags: t5 timing belt, China, suppliers, manufacturers, factory, customized, wholesale, for sale, made in China