40 Chain Sprocket

40 chain sprocket Pitch 12.7 Internal width 7.94 Roller 7.94

Send Inquiry

Product Introduction

Parameter for 40 chain sprocket:

Pitch 12.7

Internal width 7.94

Roller 7.94

Teeth NO: 8-125

The 40chain sprocket can be tested by

Visual inspection system scheme for appearance defects of sprocket

Test content

Bump, scratch, trachoma, black spot, pull mark

By collecting image information, the existing defects are detected, analyzed and judged. The position deviation of each incoming material shall be small to ensure that it is within the field of vision;

System functions:

1. When the system detects defective products, it outputs an alarm signal.

2. Display the information in real time and record the detection information.

3. Provide special tools such as system parameter adjustment and image saving, and the system interface is friendly, operable and intuitive.

4. In order to ensure data security, the system has set permission management. Only administrators with permission can modify corresponding system parameters.

5. Automatically distinguish according to the product type, automatically match the detection program, and the detection area can be adjusted according to the actual situation.

6. Automatic statistics, saving, query, call and other functions of detection history.

7. Automatic linkage of production line, remote technical service, etc.

How to select the parameter value Ra of 40chain sprocket surface roughness?

RA is 1.6-3.2 when the working surface accuracy of the chain tooth is general μ m。

RA is 0.8-1.6 when the working surface precision of the part is high μ m。

RA is 3.2 when the accuracy of the tooth bottom is general μ m。

RA is 1.6 when the part is the tooth bottom with high precision μ m。

RA is 1.6-3.2 when the part is the addendum with general accuracy μ m。

RA is 1.6-6.3 when the part is the addendum with high precision μ m。

overview