L100 Spider Coupling

L100 Spider Coupling :

SSTmachinery  L 100 spider couplings are offered in the industry’s largest variety of stock bore/keyway combinations.

These couplings require no lubrication and provide highly reliable service for light, medium, and heavy duty electrical motor and internal combustion power transmission applications.

No metal to metal contact Fail-safe，will still perform if elastomer fails Resistant to oil, dirt, sand, moisture and grease.

Most types available from stock L 100 spider coupling offers standard shaft-to-shaft connection for general industrial duty applications.

L 70, L90,L130,L150,L180,L230,L 280

Function of coupling

The coupling is used to connect the shafts in different mechanisms, mainly through rotation, so as to achieve torque transmission. Under the action of high-speed power, the coupling has the functions of buffering and damping, and the coupling has a good service life and work efficiency guarantee.

Function of coupling: it is a device that connects two shafts or shafts and rotating parts, rotates together in the process of transmitting motion and power, and does not disengage under normal conditions. Sometimes it is also used as a safety device to prevent the connected parts from bearing excessive load, which plays the role of overload protection.

The L 100 spider coupling is installed between the drive side and the passive side of the power transmission, which plays a role in transmitting the rotating torque, compensating the installation deviation between shafts, absorbing equipment vibration and buffering load impact. One of the functions of the coupling is to absorb and compensate the deviation between shafts through its own deformation. The greater the flexibility is, the stronger the ability of absorbing deviation is; The smaller the flexibility is, the weaker the ability to absorb the deviation is. Generally speaking, the deviation between shafts is divided into the following three aspects: the connection between coupling and peripheral equipment is realized by inserting the shaft of equipment into the shaft hole of coupling.

1. The coupling is used to connect two shafts (driving shaft and driven shaft) in different mechanisms to make them rotate together and transmit torque. Some couplings also have the functions of buffering, damping and improving the dynamic performance of the shafting.

2. Eliminate the inertia of radial force, connect the motor spindle with the load, and use the coupling to weaken the starting force when the motor starts.

3. Power transmission, transmitting power and torque (improving the working performance of the transmission system).

4. Different degrees of vibration reduction and buffering.

5. Disconnect for protection when the load is too large.

6. It is convenient for maintenance.

7. Change the transmission direction.

8. Concentricity correction (different degrees of axial, radial and angular compensation performance).

Hot Tags: L100 Spider Coupling, China, suppliers, manufacturers, factory, customized, wholesale, for sale, made in China