Sliding Gate Gear Rack

SST machinery make good quality sliding gate gear rack. Different module and teeth, length. Can make as drawing or standard.

Send Inquiry

Product Introduction

Gate use sliding Gate Gear Rack made in steel or nylon.

The selection of the rack of the translational door opener requires not only professional technical processing personnel and professional processing equipment, but also good gear material. Rack is a kind of special gear whose teeth are distributed on the strip. The rack is also divided into straight rack and helical rack, which are paired with straight cylindrical gear and helical cylindrical gear respectively; The tooth profile of the rack is a straight line rather than an involute (for the tooth surface, it is a plane), which is equivalent to a cylindrical gear with an infinite radius of the graduation circle.

Features of swing door opener(sliding gate gear rack inside):

1. Reasonable stress: the gantry crane is installed on the side far from the door hinge, and the driving force directly acts on the opening and closing direction of the gate. This can save electricity, so more.

2. The chute mechanism: it can automatically adapt to the slightly undulating plane, and its adaptability is about 50mm without entering the embedded track.

3. Large opening angle: the gate can be opened to any angle, so it is not limited by the gantry crane itself.

4. Automatic locking device: automatic locking when the door is closed in place, without additional electric lock.

5. It can also be operated manually: in case of power failure, it can be easily converted to manual operation with the key. It can also be switched to standby power supply or solar power supply mode.

Features of the motor of the sliding door( sliding gate gear rack inside):

1. Intelligent microcomputer: built in intelligent control chip, real-time computer monitoring, rebound when encountering resistance.

2. Technology: the door opener has the function of slow start and slow stop.

3. Power failure emergency: the motor has a key, which can open the clutch switch and manually open the door.

4. Function selection: the host has infrared ray, manual switch and light interface, which can be purchased by the user.

The Sliding Gate Gear Rack is for use with sliding gear driven gate openers. This rack is made of glass reinforced nylon around a steel tube and is much quieter in operation than a traditional steel rack. They are made specifically for brand name gate openers but will also work with most other brands of rack driven gate openers.

These gear racks are fiberglass reinforced with metal inserts. Each set hardware brackets and bolts. Compatible with all gate openers.

overview