Rubber PM Belt

Parameter for Rubber PM belt:

 

M multi wedge belt

The transmission is compact. Under the same transmission power, the space occupied by the transmission device is 25% smaller than that of the ordinary V-belt.

The back of the multi wedge belt can also be transmitted, and an automatic tension adjuster can be used to make the transmission more safe and reliable.

We make good quality rubber PM belt rubber.

Rubber PM belt consists of three parts: top fabric, tension thread and bottom rubber; The multi wedge belt is similar to the triangular belt and is also composed of three parts: top fabric, tension line and bottom rubber; The main differences between the two are: the multi wedge belt is composed of multiple micro V surfaces, which is wide and thin, so that it has greater flexibility when it surrounds the smaller transmission wheel; This enables the multi wedge belt (micro-v) to transmit power in the "serpentine" transmission. The transmission device can drive multiple engine accessories to transmit power. Timing belt structure: top rubber plus fiber, tension line and bottom rubber. The tension line is made of a very strong glass fiber. The bottom layer of the time gauge belt is composed of the teeth of the precision mold.

1. In the process of use, when there is oil or water, it should be removed or wiped in time.

 

2. In order to prevent foreign matters from being embedded in the wedge groove, a protective cover shall be provided for the belt operation.

 

3. If there is a jump during use, the belt tension may be too small, and the tension should be appropriately increased.

 

4. If the ambient temperature is too high, the cooling method shall be improved.

 

5. Ensure that the process parameters of the pulley and belt wedge are matched, and the rusted pulley shall not be used.

 

6. If the wrap angle of the multi wedge belt is too small, the position of the back pulley should be changed to increase the wrap angle.

 

Molded Seamless has no seams or splices. These Rubber PM Belts can withstand temperatures up to 500° F. They offer a product that is chemical resistant, has low thermal conductivity, and are also available with FDA compounds and additional backings (integrally molded with the base belt). These belts also have other beneficial properties such as glue release.

 

Molded endless, no seam or splice

Temperature range up to 500° F

Chemical resistance

Glue release

Low thermal conductivity

Additional backings available, molded integral with the base belt

FDA compound available

 

 

 

 

 

 

 

 

 

 

 

Hot Tags: rubber pm belt, China, suppliers, manufacturers, factory, customized, wholesale, for sale, made in China