R1AT hydraulic hose

High Pressure SAE 100 R1AT hydraulic Hose consists of three layers, the inner and outer layers are oil-resistant synthetic rubber, and the middle layer is a steel wire braided reinforcement, which can increase the pressure of the hose. The working pressure of R1AT hydraulic hose is 3270psi to 580psi, and the regular size is from 1/4" to 2". Due to the choice of high-quality raw materials, it has sufficient compressive and impact resistance, as well as good flexibility and durability. High Pressure SAE 100 R1AT hydraulic Hose has the characteristics of light weight, strong chemical resistance, etc., and is widely used in agriculture, mining, construction, infusion and so on.

Now we are talking about how to choose hydraulic hose:

1. Working pressure: This depends on the maximum working pressure and whether it can meet the requirements. We need not choose extra high pressure hose, the hose can meet our requirement is fine.

2. The inner diameter of hydraulic hose: to ensure that the medium conveyed in hydraulic hose can be transmitted smoothly without clogging, and it should be selected according to the diameter of the product used, and it cannot be too large or too small;

3. The outer diameter of hydraulic hose: according to the diameter of the product used, it cannot be too large or too small to ensure normal assembly without leakage;

4. Conveying medium: This is very important. We must pay attention to selecting the corresponding hydraulic hose. For example, if the medium to be conveyed is hydraulic oil, we must choose the one that is resistant to hydraulic oil;

5. Use environment: choose the hose according to the use environment, see whether the environment is harsh, whether it is open air, lighting time, whether it is often rubbed, external temperature, etc.;

6. Service life: According to the requirements of the product, choose the appropriate service life, and consider the difficulty and cost of replacing the hydraulic hose when the service life is up;

7. Length size: According to the size of the product and the specific conditions of use, choose the appropriate length size, try to make it just right, and do not allow it to be excessively bent or kept in a state of great tension;

8. Minimum bending radius: Because the hydraulic hose has the minimum bending radius requirement when using it, it is necessary to consider the specific position of the product using the hydraulic hose to determine the appropriate minimum bending radius, so that the normal use environment of hydraulic hose does not exceed Minimum bend radius.

After checking this points, you will know how to choose 

Hot Tags: R1AT hydraulic hose, China, suppliers, manufacturers, factory, customized, wholesale, for sale, made in China