10411 Hydraulic Fitting

 

The most commonly used metric male is 24 degree cone 10411 series and 10511 series, 10411 series is light series and 10511 series is heavy series. The material of 10411 hydraulic fitting is carbon steel Q235 or C45, the surface treatment is zinc plating.

 

The packaging of 10411 hydraulic fitting is standard export mass packaging, we will assemble thread cap to protect the female, and put them into one big plastic bag, then package the plastic bag into carton boxes, the outside package is the plywood pallet, which can afford long time sea delivery.

Followed strictly BS, EN, ASME, ANSI, AS, SAE standards, SST machinery provide a full range of hydraulic metal fittings, commonly including high pressure ferrules, female hose fittings, male hose fittings, hydraulic adapters, quick couplings, as well as various kinds of hydraulic connectors and components.

 

Crimped hose fittings are installed on hydraulic hoses to provide a secure connection for transmitting fluid and pressure. Here are the steps for installing:

 

1. Cut the hose to the desired length using a hose cutter or a sharp blade. Ensure that the cut is clean and straight.

 

2. Slide the appropriate crimp fitting onto the hose. Make sure the fitting size matches the hose size and that the orientation of the fitting is correct.

 

3. Push the hose into the fitting until the end of the hose reaches the bottom of the fitting. The hose should not extend beyond the end of the fitting.

 

4. Place the crimping tool over the fitting and position it according to the instructions for your specific tool. The tool should fit snugly and uniformly over the entire circumference of the fitting.

 

5. Squeeze the crimping tool handles together until the tool crimps the fitting onto the hose. The tool should apply enough pressure to deform the fitting onto the hose without damaging or crushing the hose itself.

 

6. Inspect the crimped connection for any signs of damage or defects. Check for leaks or loose parts.

 

7. Test the hose and fitting assembly by running fluid through it under pressure. Ensure that the assembly functions properly and does not leak.

 

Note: Always follow the specific instructions for your crimping tool and fittings. Improper installation can lead to leaks, kinks, or failures that could cause injury or damage.

 

The 10411 Hydraulic Fitting is a straight male hydraulic hose fitting with 24 degree metric threads that creates a leak-free seal between two components.
Metric hydraulic hose fittings come in a variety of sizes and dimensions to accommodate different fluid systems.

 

Hot Tags: 10411 hydraulic fitting, China, suppliers, manufacturers, factory, customized, wholesale, for sale, made in China