Brass Flare FIP/FPT

SST machinery provides many sizes for this brass flare fitting, for JIC male flare, we have 1/4”, 5/16”, 3/8” 1/2”; for the female NPT size, we have 1/8” 1/4” 1/2” 3/8”, 3/4” etc…, that is to say you can choose same size for both ends, also you can find different sizes for two ends.

Send Inquiry

Product Introduction

103_02

Brass flare male to FIP/FPT :

SST machinery provides many sizes of brass flare FIP/FPT, for brass flare male side, we have 1/4", 5/16", 3/8" 1/2"; for the female NPT size, we have 1/8" 1/4" 1/2" 3/8", 3/4" etc…, that is to say you can choose same size for both ends, also you can find different sizes for two ends.

Our regular material for brass flare fitting is brass H58, we also can offer higher brass like H59 or H60 as request. Considering brass has good characteristic of anti-corrosion, generally speaking we need not to proceed surface treament, while if you want nickel plating or chromme plating, we also can meet your requirement.

The packaging way of brass flare FIP/FPT is mass packaging, that is plastic bag+box+pallet. we also provide special packaging as request, please contact our sales team for further discussion.

The symbol for copper is Cu, the atomic weight is 63,54, the specific gravity is 8.92, and the melting point is 1083°C. Pure copper is light rose or light red, and after the copper oxide film is formed on the surface, the appearance is copper-colored, so it is also commonly known as copper. A8920SLRTR copper has many valuable physical and chemical properties, such as its high thermal conductivity and electrical conductivity, strong chemical stability, high tensile strength, easy melting, corrosion resistance, plasticity, ductility and so on. Because of its more stable chemical properties than other metals, copper is widely used. Pure copper can be drawn into very thin copper wires to make very thin copper foils. It can be mixed with zinc, tin, lead, manganese, nickel , aluminum, iron and other metals to form alloys.

Brass Flare FIP/FPT, AGA Standard 15/16" – 16 flare size. For use with copper, brass, aluminum, welded steel pipe. For use with difficult to contain liquids and gases including gasoline, grease, water, vacuum lines, air lines, LPG and natural gasoline, refrigeration and air conditioning. Temperature range from 65 to 250 degrees Fahrenheit.

Brass male flare x female pipe adapter. Not for use in potable drinking water applications. Used for fuel, oil, air, liquid petroleum (LP), and natural gas lines connections.

Compliant Product Which Meets California AB-1953

Compliant Product Which Meets Vermont SB-152

Two Piece Construction - Nut And Body

Use With Copper, Brass, Aluminum, Or Steel Tubing

Negavtive 65 Degreees to Plus 250 Degrees F. Temperature Range

Standard Fittings Use Short Nuts. Long Nuts Are Available For Higher Vibrations Applications.

Resists Mechanical Pullout

Easy To Disassemble And Can Be Reassembled Many Times, With No Effect On The Seal

Primary Uses: Fuel Equipment, Plumbing, Gases, Refrigeration, and Vacumm Lines.

To Assemble:

1. Cut Smooth, Square End On Tubbing

2. Slide Nut onto Tube - Threads Facing End