Features of carbon steel crimp joints:
1. In use, the carbon steel crimping joint should not be bent excessively or bent at the root, and should be bent at least 1.5 times its diameter;
2. When the carbon steel crimping joint is moved to the extreme position, it should not be pulled too tightly, and should be relatively loose;
3. Try to avoid torsional deformation of carbon steel crimping joints;
4. External damage should be avoided, such as long-term mutual friction on the surface of the same component during use;The carbon steel crimping joint is a relatively common joint. There is a tooth design inside the end of the carbon steel crimping joint connecting the pipe. The hydraulic oil pipe is completely tight through the holding device, but the important part is only the hydraulic oil pipe. The outer rubber layer and reinforcement layer will not cause the hydraulic oil pipe to leak, nor will it affect the working pressure.
